Over the past few weeks, having done two little quilts in quick succession, I have hit on a method for sewing on the binding, using the seam guide to keep it all straight and neat. The mitred corners have been particularly trouble-free. On the front the stitching sits close to the edge of the binding, and on the back...
... it is clear of the binding, running parallel to it.
First, I stabilise the cut edge of the quilt with two lines of machine stitching. This makes the edge firm, so it lines up easily against the seam guide when attaching the binding, and if the quilting is widely spaced, it prevents the top layer from rumpling or pleating. It also keeps the corners nice and sharp, which makes mitring the corners easier
The seam guide keeps these first two lines of stitching straight. It has to be placed as far over to the left as possible, so it is right up against the side of the foot.
This places the needle approximately an eighth of an inch from the edge. Once the first line of stitching has gone all the way round the quilt, I remove the seam guide and put a second line of stitching between the first line and the edge of the quilt.
Next, I attach the binding. The binding is one and five eighths of an inch wide, with one side ironed over by about a quarter of an inch. The unironed edge is laid along the edge of the quilt on the back, and the seam guide set to approximately three eighths of an inch.
When the binding is folded over to the front, I place the needle through the work close to the edge of the binding, and then line up the seam guide with the edge of the work. Only then do I start stitching. The seam guide prevents the stitching veering off the edge of the binding.
Using the seam guide has helped me do my neatest binding and best corners ever. I don't know why it has never occurred to me to try this before.
Linking up today with Connie's blog Freemotion by the River for Linky Tuesday
and Kelly's blog My Quilt Infatuation for Needle and Thread Thursday
